Wednesday, December 30, 2009

Day 6 of the 12 Days of Christmas ATC



These Snowflake embellishment were make using Sweetbrier Studio Snowflake mold, Blue Moon embossing powder and Melting Pot.

Tuesday, December 29, 2009

Monday, December 28, 2009

Day 4 of the 12 Days of Christmas ATC



This one I use Sweetbrier Studio Snowflake mold and PaperClay for my embellishment. Watch the video on how to complete all 12 days of Christmas ATC on my youtube channel. For your chance at winning a prize you must post a comment and your ATC.
I can't wait to see what you made.

Sunday, December 27, 2009

Day 3 of the 12 Days of Christmas ATC



Follow direction for Christmas ATC on YouTube - this one I add snowflake brads.
Please let me a comment and post your ATC for your chance at winning three bottles of Memories Mists.

Saturday, December 26, 2009

Day 2 of the 12 Days of Christmas ATC



Follow all the step in my youtube video on how to Make the basic part of this ATC.
This ATC embellishments is just two pieces of ribbon adhered under the "Turtle doves".
Remember to comment and post your ATC for me to see and win a prize.

Friday, December 25, 2009

1st Day of Christmas ATC w/ Video


Here is Day one of the 12 Days Of Christmas ATC's, for the basic of this ATC, i have included a video on my Youtube Channel.
The embellishment on this ATC is made using paper Clay and Sweetbrier Studio Molds.
You could win a prize if you post a comment and your ATC. Can't wait to see what you do...

Monday, December 21, 2009

Oh Christmas Tree Scrapbook page.


This is a two page spread I made - with all the Christmas tree photo from this year.




I stamp "Music background" stamp from Rubber Stamped using Palette "Noir Black" onto vellum set aside to let ink dry - Rip around the image and ink all edges again using "Noir Black"



Ink up "Antique Border" using Palette "Stamp & Stick GluePad" and stamp onto white Glossy cardstock.

Heat using your embossing gun - until the Stamp and Stick gluepad is tacky.


Add some "Red Leaf" use you finger tips press the leaf down.... then use a soft brush and remove all the extra (keep the extra in a plastic bowl and reuse later, NO waste)



Using a Circle Punch (use it upside down) and punch out a circle - this is how I make the Christmas ornament. Just added a small piece of silver paper and wire.


these are Tim Holtz Grungeboard Letter - I ink them with Memories Metallic "Red" then spray them with Memories Mists "Bright Gold" - spelled our "oh tree" I have a sticker from Ek success that said "Christmas" used that in between the two words... "OH Christmas Tree"


I stamp twice "Pine Branch" from Stampotique using white embossing powder. Here is where I hung the Christmas Oranment I made.

The Christmas tree embellishment on this page is one of Ek Success. Any Question please let me know... I will help you out...

contest - 12 days of Christmas ATC

Two of my ATC when up early. - Me and the computer - well what more can I say... LOL
Day one of the 12 days of Christmas will start on DEC 25th (the first day of Christmas). The Video and supply list is up. Supplies list is here on my blog and the video is on Youtube.
You can make what ever you like - just share your comments and your work with me and you could win three bottles of Memory Mists from Stewart Superior.
Also share your work with me and your other friends of FACEBOOK. Are you may friend yet. if not find me and befriend me.... Can't wait to see your work.... I am so excited...

Saturday, December 19, 2009

Post your comment and ATC and win a prize

At the end of the 12 days of Christmas ATC series, I will be awarding three bottle of Memories Mists from Stewart Superior to the winner. To Win, just post a comment on my ATC and post one of your ATC's. Can't wait to see what you come up with.
FACEBOOK: You can post your project on facebook as long as you are my friend.... and I hope you are.
Winner will be announced on Jan 5, 2010 on this blog.... Need to stop by here to find out if you won or not.
Can't wait to see what you guys come up with.... I am so excited...

12 Days of Christmas Supplies List

Supplies you will need to complete the 12 Days of Christmas with me... Hope you have fun.


Stamps: 12 days of Christmas Cube Stamps by Stampington , Cloisonné Words and Phrases by Michael Strong, Large Flaky Background by Stampotique

Ink: India Ink, The Embosser, Memories Chalk “Faded Lavender”, Palette “Starry Night”, Memories Mists: “Blueberry Shake” and “Iridescent”

Embossing Powder: Cloisonné: Clear and Blue Moon

Heat gun

Melting Pot:

Sweetbrier Studio: “Let it Snow” mold

Foam Mounting Square by Super Glue

Zip Dry Paper Glue

White cardstock cut to ATC size (2 ½” x 31/2”)

White Cardstock

Colored Pencils

Wednesday, December 9, 2009

Home with a tree


Supplies:

Stamps: Merry Christmas by Michael Strong, “A Car Full” by Stampotique

Die Cut: Medium Pine Tree from Sizzix

Chip Board

Ink: Palette Hybrid Inkpad “Landscape”, “The Embosser”, Memories Chalk “Gingerbread”, India Ink

Black Embossing Powder: Filigree by Stewart Superior

Embossing Gun

Black Brad or eyelets

Brown String

Zip Dry Paper Glue

Magic Scraps: Snow

Cardstock: Two shade of green – lighter green for card base, dark green for matt.

Directions:


1) Cut Light Green cardstock into Card base size. 8 ½” x 5 ½” – score at 4 ¼”.

2) Cut Dark Green Cardstock to 5 ¼” x 4”. Stamp “Merry Christmas on the top of the cardstock using India Ink. Punch a hole in top two corners and add black brad or eyelets.

Foam Mounting Squares

3) Using you Zip Dry Paper Glue – add some glue across the Dark Green cardstock bottom and pour some Magic Scraps “Snow” and let dry. Once Glue is dry tap off excess “snow”.

4) Using your Chip Board and Die Cut machine – Cut out “Pine Tree”. Using a direction to paper technique add “Landscape” Ink to tree top and “Gingerbread” to tree base. Add a little Zip Dry Glue to tree and snow to tree…



5) Stamp “Full Car” onto Chip Board using Embossing ink and Filigree “Black embossing powder”. Cut out image – BUT – Cut off the all the people except the driver and his lady. Punch a hole in both of the windows to cut the window out. After you Punch the hole in the windows – you can put your scissor in the hole and cut the window out.


6) Tie tree to top of card using string. I tied my to the window and back end. You can add a small drop of Zip Dry Glue to the back of the tree to help hold the string in place. Zip Dry Glue will dry clear.


7) I place two Foam Mounting Squares on the back of the car to give it dimension. Place car onto Dark Green Cardstock just above the snow….


Tuesday, December 8, 2009

Santa Baby


If you seen the tag i did yesterday, This one is almost the same only a few differences.

Santa stamp is from : Stampington & Company
Music Background stamp from Delta
Metal Tag is from Die cuts with a View
Flower: From QVC

Follow the same direction as the Merry Christmas tag. before removing the MasquePen stamp Music Background in Palette "Haystack" and Spray the whole tag with Iridescent Memory Mists from Stewart Superior
Then peel off your Mask (masquePen)
Add Flower and tag to top and you are done.

Monday, December 7, 2009

Merry Christmas Tag


Merry Christmas Tag

By Terri Sproul

Supplies

MasquePen

Inks: Indian Ink, Memories Chalk Ink “Cloudy Coral” and “Pale Olive”, Memories Metallic Ink: “Silver”, Embossing Ink – All from Stewart Superior

Stamps: “Merry Christmas”, “Night before Christmas” Set by Close to my Heart, and Flourish Stamp.

Tag: Make or purchase one (see my Youtube video on how to make your own tag)

Embossing Powder: Filigree “Gold” by Stewart Superior

Make up sponge

Embossing Gun

Fibers


Direction:

1) Ink up Santa Stamp using Indian Ink. Stamp onto Tag. Let dry (only take about a minute – you can heat set to speed up ink).

2) Cover Image with MasquePen – set aside to dry – MasquePen turns clear then dry.

3) After MasquePen is completely dry, remember it turns clear. Using a Make up sponge – add “cloudy coral” and “Pale Olive” ink to all tag.



4) Ink up Flourish Stamp with metallic Sliver and stamp randomly over all of tag.
Remember to stamp over the Santa (MasquePen will protect the image).

5) Ink Up “Merry Christmas” stamp using Embossing ink and add Gold embossing powder, remove exceeds and heat with embossing gun

6) Add fibers to tag and you are done

This was a fun tag to make. Hope you enjoyed it. any question please let me know... Thanks for your visit.

Saturday, December 5, 2009

Bundle of Joy Tag


Supplies:
Stamp: "Snowman" and "Large Flaky Background" both by Stampotique
Ink: Memories Mists: "Blueberry Shake" and "Iridescent", Palette Hybrid Ink "Starry Nights", "India Ink" all ink from Stewart Superior
Cooper Wire
Pop Dots
Adhesive: I use "Zip Dry" by Beaconcreates
Metal Word: "Bundle of joy" from Die Cuts with a View
Fiber: got my at Michael craft store
Tag: 4 1/2" x 2 1/2" use store bought or I do have a video on how to make your own tags.
Accent Powder: Int. Blue from Stewart Superior
Water
Paint Brush
craft sheet
Colored Pencil

Direction:
1) Spray Tag with Memories Mists: Blueberry Shake, when dry Stamp "large Flaky Background using Starry Night ink. Ink all edges of tag with Starry Night Ink. Spray all of the tag using Memories Mists: Iridescent. Set aside
2) Stamp Snowman using India Ink onto white cardstock


3) On craft sheet place a small amount of Accent Powder and gentle spray water onto it. Mix water into the powder using a paint brush, paint Accent Powder onto Snowman Image. Let dry.
After the Accent powder is dry add color in image with colored pencils. Cut out image but cut off his arms.


4) To make his arms: Cut three wires about 2 1/2" long - twist all three together and arrange the ends to look like fingers. See sample
Adhere the wire to the back of the snow man using a pop dot. Wires will go under the pop dot closes to the paper. Adhere Snowman to bottom of tag.
5) Add Metal words and fiber to tag and you are done.

Thursday, December 3, 2009

Wedding Book - continue 2



Here is the Cake page for my friends wedding album. Corner were made with chip board and pattern paper.